Skip to content

editor › Globals › IntersectionAvoidanceCrossJoint

Class: IntersectionAvoidanceCrossJoint

Hierarchy

↳ EdgeJoint

↳ IntersectionAvoidanceCrossJoint

Index

Constructors

Properties

Methods

Constructors

constructor

+ new IntersectionAvoidanceCrossJoint(jointPossibilityA?: JointPossibility, jointPossibilityB?: JointPossibility): IntersectionAvoidanceCrossJoint

Inherited from Joint.constructor

Defined in src/model/data/Joints/Joints/Joint.ts:72

Either supply joint possibilities in constructor, or defer it and do it later with assign()

Parameters:

Name Type
jointPossibilityA? JointPossibility
jointPossibilityB? JointPossibility

Returns: IntersectionAvoidanceCrossJoint

Properties

Protected Readonly destroyEventEmitter

• destroyEventEmitter: EventEmitter‹void› = new EventEmitter()

Inherited from Joint.destroyEventEmitter

Defined in src/model/data/Joints/Joints/Joint.ts:72

Protected isDestroyed

• isDestroyed: boolean = false

Inherited from Joint.isDestroyed

Defined in src/model/data/Joints/Joints/Joint.ts:71

Protected objectA

• objectA: PhysicalObject

Inherited from Joint.objectA

Defined in src/model/data/Joints/Joints/Joint.ts:69

Protected objectB

• objectB: PhysicalObject

Inherited from Joint.objectB

Defined in src/model/data/Joints/Joints/Joint.ts:70

Protected outlineSectionA

• outlineSectionA: OutlineSection

Inherited from EdgeJoint.outlineSectionA

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:168

Protected outlineSectionB

• outlineSectionB: OutlineSection

Inherited from EdgeJoint.outlineSectionB

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:169

unfoldingProperties

• unfoldingProperties: IEdgeUnfoldingProperties = EdgeUnfoldingAnnotation.getDefaultUnfoldingProperties()

Inherited from EdgeJoint.unfoldingProperties

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:166

Methods

_ensureAssigned

▸ _ensureAssigned(): void | never

Inherited from Joint._ensureAssigned

Defined in src/model/data/Joints/Joints/Joint.ts:122

Returns: void | never

Protected _mergeSections

▸ _mergeSections(sectionA: OutlineSection, sectionB: OutlineSection): void

Inherited from EdgeJoint._mergeSections

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:307

Performs actual joining logic by merging the vertices of two sections

Parameters:

Name Type
sectionA OutlineSection
sectionB OutlineSection

Returns: void

Protected _onObjectShapeChange

▸ _onObjectShapeChange(changedObject: PhysicalObject): void

Inherited from Joint._onObjectShapeChange

Defined in src/model/data/Joints/Joints/Joint.ts:219

Method that is called when the shapes of one of the joined objects change. Can be overwritten in subclass.

Parameters:

Name Type
changedObject PhysicalObject

Returns: void

Protected _onObjectTransformsChange

▸ _onObjectTransformsChange(changedObject: PhysicalObject): void

Inherited from Joint._onObjectTransformsChange

Defined in src/model/data/Joints/Joints/Joint.ts:211

Method that is called when the transforms of one of the joined objects change. Can be overwritten in subclass.

Parameters:

Name Type
changedObject PhysicalObject

Returns: void

areSectionsReversed

▸ areSectionsReversed(): boolean | never

Inherited from EdgeJoint.areSectionsReversed

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:268

Returns: boolean | never

assign

▸ assign(jointPossibilityA: any, jointPossibilityB: any): void

Inherited from EdgeJoint.assign

Overrides Joint.assign

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:171

Parameters:

Name Type
jointPossibilityA any
jointPossibilityB any

Returns: void

createTemporaryClone

▸ createTemporaryClone(): Joint

Inherited from Joint.createTemporaryClone

Defined in src/model/data/Joints/Joints/Joint.ts:183

This method creates a new Joint with the two physicalObjects of this joint instance. This is useful for operations where you need a temporary joint to keep an assembly from falling apart (e.g. Joint.recreate).

Returns: Joint

the temporary joint

destroy

▸ destroy(): void

Inherited from EdgeJoint.destroy

Overrides Joint.destroy

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:234

Returns: void

determineJointDirection

▸ determineJointDirection(section: OutlineSection): PlateSide

Inherited from EdgeJoint.determineJointDirection

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:276

Returns "front" or "back" depending on where the other plate is joined to the passed plate.

Parameters:

Name Type
section OutlineSection

Returns: PlateSide

getDestroyEventEmitter

▸ getDestroyEventEmitter(): IPublicEventEmitterInterface‹void›

Inherited from Joint.getDestroyEventEmitter

Defined in src/model/data/Joints/Joints/Joint.ts:86

Returns: IPublicEventEmitterInterface‹void›

getEnd

▸ getEnd(): OutlinePoint | never

Inherited from EdgeJoint.getEnd

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:263

Returns: OutlinePoint | never

getIsAssigned

▸ getIsAssigned(): boolean

Inherited from Joint.getIsAssigned

Defined in src/model/data/Joints/Joints/Joint.ts:118

Returns: boolean

true, if the joint has been assigned to two objects

getOtherPhysicalObject

▸ getOtherPhysicalObject(thisPhysicalObject: PhysicalObject): PhysicalObject | never

Inherited from Joint.getOtherPhysicalObject

Defined in src/model/data/Joints/Joints/Joint.ts:131

Convenience function to get the 'other' physical object that is connected to this joint

Parameters:

Name Type
thisPhysicalObject PhysicalObject

Returns: PhysicalObject | never

getOtherSection

▸ getOtherSection(section: OutlineSection): OutlineSection | never

Inherited from EdgeJoint.getOtherSection

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:222

Convenience Function to get the other OutlineSection

Parameters:

Name Type
section OutlineSection

Returns: OutlineSection | never

getOutlineSection

▸ getOutlineSection(physicalObject: any): OutlineSection | never

Inherited from EdgeJoint.getOutlineSection

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:197

Parameters:

Name Type
physicalObject any

Returns: OutlineSection | never

the outline section that is attached

getOutlineSections

▸ getOutlineSections(): [OutlineSection, OutlineSection]

Inherited from EdgeJoint.getOutlineSections

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:190

Returns: [OutlineSection, OutlineSection]

the two OutlineSections of this joint

getPhysicalObjects

▸ getPhysicalObjects(): [PhysicalObject, PhysicalObject]

Inherited from Joint.getPhysicalObjects

Defined in src/model/data/Joints/Joints/Joint.ts:146

Returns: [PhysicalObject, PhysicalObject]

getRemovalDirection

▸ getRemovalDirection(section: OutlineSection): IDirectionSpace

Inherited from EdgeJoint.getRemovalDirection

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:283

Parameters:

Name Type
section OutlineSection

Returns: IDirectionSpace

getStart

▸ getStart(): OutlinePoint | never

Inherited from EdgeJoint.getStart

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:258

Returns: OutlinePoint | never

hasOutlinePoint

▸ hasOutlinePoint(outlinePoint: OutlinePoint): boolean

Inherited from EdgeJoint.hasOutlinePoint

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:212

Parameters:

Name Type
outlinePoint OutlinePoint

Returns: boolean

if the given point is merged with this joint's first section

isPhysicallyConnected

▸ isPhysicallyConnected(): boolean | never

Inherited from EdgeJoint.isPhysicallyConnected

Overrides Joint.isPhysicallyConnected

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:253

Checks if vertices of both sections are still merged/at the same position

Returns: boolean | never

recreate

▸ recreate(): IntersectionAvoidanceCrossJoint | never

Overrides Joint.recreate

Defined in src/model/data/Joints/Joints/IntersectionAvoidanceCrossJoint.ts:28

Returns: IntersectionAvoidanceCrossJoint | never

Static assignFromSections

▸ assignFromSections(outlineSectionA: OutlineSection, outlineSectionB: OutlineSection, jointInstance: EdgeJoint): void

Inherited from EdgeJoint.assignFromSections

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:132

Parameters:

Name Type
outlineSectionA OutlineSection
outlineSectionB OutlineSection
jointInstance EdgeJoint

Returns: void

Static canBeJoined

▸ canBeJoined(objectA: PhysicalObject, objectB: PhysicalObject, params: object): boolean

Inherited from EdgeJoint.canBeJoined

Overrides Joint.canBeJoined

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:107

Parameters:

▪ objectA: PhysicalObject

▪ objectB: PhysicalObject

▪Default value params: object= { onlyConvex: false }

Name Type
onlyConvex boolean

Returns: boolean

Static canSectionsBeJoined

▸ canSectionsBeJoined(sectionA: OutlineSection, sectionB: OutlineSection, onlyConvex: boolean, allowRejoin: boolean): boolean

Inherited from EdgeJoint.canSectionsBeJoined

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:41

Checks whether outlineSections are identical, already have joints to determine if they can be joined.

Parameters:

Name Type Default Description
sectionA OutlineSection - to be checked
sectionB OutlineSection - second outline section to be checked
onlyConvex boolean false (option) true if only convex edges should be considered, default is false
allowRejoin boolean false (option) true if already joined sections should be considered join-able as well, default is false

Returns: boolean

true if outlineSections can be joined

Static createFromPhysicalObjects

▸ createFromPhysicalObjects(objectA: Plate, objectB: Plate, EdgeJointClass: any, __namedParameters: object): EdgeJoint[]

Inherited from EdgeJoint.createFromPhysicalObjects

Overrides Joint.createFromPhysicalObjects

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:86

Parameters:

▪ objectA: Plate

▪ objectB: Plate

▪ EdgeJointClass: any

▪Default value __namedParameters: object= {}

Name Type Default
onlyConvex boolean false

Returns: EdgeJoint[]

Static createFromSections

▸ createFromSections‹JointType›(outlineSectionA: OutlineSection, outlineSectionB: OutlineSection): IntersectionAvoidanceCrossJoint

Overrides EdgeJoint.createFromSections

Defined in src/model/data/Joints/Joints/IntersectionAvoidanceCrossJoint.ts:5

Type parameters:

▪ JointType: IntersectionAvoidanceCrossJoint

Parameters:

Name Type
outlineSectionA OutlineSection
outlineSectionB OutlineSection

Returns: IntersectionAvoidanceCrossJoint

▸ createFromSections‹JointType›(outlineSectionA: OutlineSection, outlineSectionB: OutlineSection, IntersectionAvoidanceCrossJointType?: Constructor‹JointType›): JointType

Overrides EdgeJoint.createFromSections

Defined in src/model/data/Joints/Joints/IntersectionAvoidanceCrossJoint.ts:9

Type parameters:

▪ JointType: IntersectionAvoidanceCrossJoint

Parameters:

Name Type
outlineSectionA OutlineSection
outlineSectionB OutlineSection
IntersectionAvoidanceCrossJointType? Constructor‹JointType›

Returns: JointType

Static getJointsBetween

▸ getJointsBetween‹T›(plateA: Plate, plateB: Plate, type: Constructor‹T›): T[]

Inherited from Joint.getJointsBetween

Defined in src/model/data/Joints/Joints/Joint.ts:11

Type parameters:

▪ T: Joint

Parameters:

Name Type
plateA Plate
plateB Plate
type Constructor‹T›

Returns: T[]

Static getRequiredPossibilities

▸ getRequiredPossibilities(): [JointPossibility, JointPossibility]

Inherited from Joint.getRequiredPossibilities

Defined in src/model/data/Joints/Joints/Joint.ts:21

Defines the required JointPossibilities in order to instantiate this kind of Joint. Override in subclass.

Returns: [JointPossibility, JointPossibility]

an array with exactly two JointPossibility (sub)classes.

Static getSpansAcrossAssemblies

▸ getSpansAcrossAssemblies(): boolean

Inherited from Joint.getSpansAcrossAssemblies

Defined in src/model/data/Joints/Joints/Joint.ts:65

Returns: boolean

whether joints of this class span across assemblies. In that case, physical objects will be linked with physics constraints rather than merging assemblies during joining

Static isPointOnEdgeJoint

▸ isPointOnEdgeJoint(point: OutlinePoint, type: Constructor‹EdgeJoint›): boolean

Inherited from EdgeJoint.isPointOnEdgeJoint

Defined in src/model/data/Joints/Joints/EdgeJoint.ts:25

Parameters:

Name Type Default
point OutlinePoint -
type Constructor‹EdgeJoint› EdgeJoint

Returns: boolean

Static performPreJoinTransformation

▸ performPreJoinTransformation(jointPossibilityA: JointPossibility, jointPossibilityB: JointPossibility): void

Inherited from Joint.performPreJoinTransformation

Defined in src/model/data/Joints/Joints/Joint.ts:29

Translates the objects in order to make sure they can be joined. Override in subclass with actual translation logic.

Parameters:

Name Type
jointPossibilityA JointPossibility
jointPossibilityB JointPossibility

Returns: void